What nP means on your Kenmore dryer (kenmore np error)
A kenmore np error is a verified LG code, confirmed on LG’s own USA support pages, meaning no current is detected at the heater — an electrical wiring problem — on your LG-built Kenmore dryer (795/796-prefix).
Symptoms
The signs below help confirm you are dealing with this condition rather than a different problem on your Kenmore dryer. You may notice one of them or several together, and they can appear gradually or suddenly after a power event, a wash or cook cycle, a spill, or recent installation or service.
- The display shows nP
- The dryer runs and tumbles but produces no heat
- The cycle may run to completion with damp clothes
- The code appears consistently across cycles
Common causes
Several different problems can produce these symptoms. Working through the most likely causes in order separates a quick owner-level check from a problem that needs trained service and the correct Kenmore parts.
- Open circuit to the heater — a wiring failure is preventing current from reaching the heating element
- Tripped breaker or blown thermal fuse feeding the heater circuit
Troubleshooting steps you can try
Work through these checks in order before calling for service. Stop wherever you are unsure, or where mains voltage, gas, a hot oven cavity, water, or a sealed component is involved, and hand the rest to a qualified technician.
- Confirm the dryer’s circuit breaker (both legs, for electric dryers) is fully on.
- Power-cycle the dryer and attempt a restart.
- Avoid repeated resets if nP persists.
- Book service for wiring and heater-circuit diagnosis.
Parts a technician may replace
Depending on what the diagnosis shows, a technician may inspect, test, or replace the heating element/heater, wiring harness, and circuit breaker. The correct part for your Kenmore dryer is matched from the model and serial number, and genuine OEM components are fitted through trusted parts suppliers rather than generic substitutes so performance, safety, and the appliance long working life are all protected. Confirming the failed part before ordering avoids replacing more than the problem actually requires.
When to call a technician
nP needs an experienced technician to test the heater circuit wiring, thermal fuse, and heating element on this LG-built Kenmore dryer. Because this condition is rated High severity, it is safest to stop using the dryer and arrange service promptly rather than keep retrying, and to shut off power or water at the source if anything looks, smells, or sounds unsafe. As an independent repair service we are not affiliated with the manufacturer, and we work only with experienced, skilled technicians and genuine OEM parts from trusted parts suppliers, with our workmanship backed by a 30-day labor warranty. When you book, have your Kenmore dryer model and serial number ready so the right part for your exact build can be matched before the visit and the nP condition resolved in as few trips as possible.
Related help and Kenmore resources
If the nP condition keeps returning after these checks, book Kenmore dryer repair, browse our dryer error-code guides and step-by-step repair guides, or schedule service in your area on our locations page. See also the related PS improper power-cord voltage. For full manufacturer specifications and model lookup, visit kenmore.com.
